Hazardous Area Cable Glands & Connectors

Hawke Cable Glands cover the whole spectrum of armored and non-armored cable and applications from general industrial through increased safety, deluge, flameproof and explosion proof. The Cable Glands are available in Ni Plated Brass as standard with Stainless Steel and Aluminum, as an optional material on certain designs. The innovative design features included in the range make Hawkes Cable Glands the lowest lifetime cost solution.

Hawke Ex range of Connectors permit the safe and rapid service, repair and replacement of key plant, provide quick connection to temporary and permanent equipment and greatly reduce hook-up time in capital-intensive processes.

Common Glands used in Hazardous Area's

	Type/Product Data Sheet	Assembly Instructions
	501/421 Ex de (170610) Provides a seal on the outer cable sheath and is intended for use on non-armoured elastomer and plastic insulated cables.	AI 501/421 (0810)
	501/423 Ex de (090610) Provides two independent seals on non-armoured elastomer and plastic insulated cables. The first is a flameproof seal on the inner or outer cable sheath, with an additional IP seal on the outer sheath.	AI 501/423 (0809)
	501/453 RAC Ex de Reversible Armour Clamping (170610) Outdoor or indoor use. For use with single wire armour "W", wire braid "X", steel tape armour "Z", elastomer and plastic insulated cables.	AI 501/453/RAC (0809)
	501/453 Ex de Universal (170610) Outdoor or indoor use. For use with single wire armour "W", wire braid "X", steel tape armour "Z", elastomer and plastic insulated cables. For particular use with cables that exhibit 'Cold Flow' characteristics.	AI 501/453/Univ -size Os to F (0909) AI 501/453/Univ -size G to J (0809)
	Compound Barrier ICG 623 Ex de (090610) Outdoor or indoor use. For use with non-armoured elastomer and plastic insulated cables. For particular use with:- cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers; cables that exhibit 'Cold Flow' characteristics; enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area and exceeding 2 litres in volume.	AI ICG 623 (1108)
	Compound Barrier ICG 653 Ex de (090610) Outdoor or indoor use. For use with single wire armour "W", wire braid "X", steel tape armour "Z", elastomer and plastic insulated cables. For particular use with:- cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers; cables that exhibit 'Cold Flow' characteristics; enclosures containing an ignition source in a Zone 1 area.	AI ICG 653/Univ (1108)

Connector Range

	Type/Selection Overview	Features
	InstrumEx (081210) Designed to provide ease of installation and speed of use whilst providing a flexible, safe and reliable method for mating and disconnection of circuits which are energised. ControlEx (081210) The 3rd generation of ControlEX connectors include many features and refinements as a result of consumer feedback, which makes them particularly suitable for control and low/medium power applications. The robust stainless steel body can hold up to 60 contacts and will accept conductor sizes ranging between 0.5mm2 and 35mm2, operating up to 125A and 660V. PowerEx (081210) The PowerEx range of connectors have been designed specifically for the extremely demanding requirements of higher power applications. Inserts are available with 1 to 5 contacts with a conductor acceptance range of between 50mm2 and 630mm2 operating up to 780A and 750V as standard. Other voltages available on special request.	InstrumEx Feature Sheet (081210) ControlEx Feature Sheet (081210) PowerEx Feature Sheet (081210)